Posted on

ESDEMC Releases ES660 P2 Second-Generation Motherboard, Raising Maximum Test Pins to 3072 Pin

PRODUCT RELEASE

May 25, 2026 · ESDEMC Technology LLC · Category: ESD / Latch-Up Test Systems

May 25, 2026 – ESDEMC has released the P2 second-generation motherboard for the ES660 platform. The ES660 is an automated ESD test system (ESD tester) for HBM (Human Body Model), MM (Machine Model), and Latch-Up (LU / TLU) testing. The Gen 2 board raises the system’s maximum test pin count from 2560 Pin on the P2 first generation to 3072 Pin — a net increase of 512 Pin (+20%). All other test capabilities and electrical specifications are unchanged.

ES660 ESD and Latch-Up Test System (Rack ATE Assembly)

ES660 ESD & Latch-Up Test System · Rack ATE Assembly (complete system)

Pin capacity: from 2560 Pin to 3072 Pin

The Gen 2 board uses a higher-density motherboard design. Fully populated with 48 × 64 Pin relay cards, it reaches 3072 Pin, versus 40 cards and 2560 Pin on the P2 first generation. Each card still carries 64 Pin, so the added capacity comes entirely from expanding the card slots (card count); test methods and software are unchanged. The table below compares the two generations — only the pin ceiling changes; everything else stays the same.

ParameterP2 Gen 1P2 Gen 2Change
Max Test Pins2560 Pin3072 Pin▲ +512 Pin (+20%)
Relay Cards40 × 64 Pin48 × 64 Pin▲ +8 cards
Pins per Card64 Pin64 PinSame
Max Test Speed15 Pulse / Second15 Pulse / SecondSame
HBM / MM10 kV / 4 kV10 kV / 4 kVSame
Latch-Up (LU)±300 V / 1 A±300 V / 1 ASame
SMU Leakage1100 V SMU1100 V SMUSame
Low ParasiticJS-001 2024 Annex C5 (N ≥ 9)JS-001 2024 Annex C5 (N ≥ 9)Same

1

Figure 1 · Motherboard generations and maximum test pins: P1 moves from 1024 Pin (Gen 1) to 1280 Pin (Gen 2) — current P1 boards remain mostly 1024 Pin, with both card counts in use; P2 first-generation 2560 Pin orders can upgrade to 3072 Pin (48 × 64 Pin). Speed roadmap: 15 P/S today, 20+ P/S planned.

Test capabilities that stay the same

The Gen 2 board changes no existing test capability. Maximum test speed remains 15 Pulse / Second, with ≥8 simultaneous pulses maintained above 512 Pin. HBM covers ±10 – 10000 V (10 kV), MM covers ±10 – 4000 V (4 kV), and Latch-Up supports ±300 V / 1 A DC bias and stress (per JEDEC JESD78), with 1100 V SMU leakage measurement. The relay matrix is rated to 800 V DC (ESD / leakage paths 1200+ V DC), and the low-parasitic design meets JS-001 2017 Annex B4 / 2024 Annex C5 (N ≥ 9). Standards covered: JS-001, SP5.2, JESD78, and SP5.4.1 (TLU).

ES660 internal view: relay matrix and P2 second-generation motherboard

ES660 internal view · relay matrix and motherboard architecture (the Gen 2 upgrade point: higher-density motherboard + 48 × 64 Pin relay cards)

Relay-card ecosystem and roadmap

The ES660-P2-R64 series relay cards (R1 / R4 / B8 / B8-HV / B10 / B12 bias options) continue on the Gen 2 platform, so existing cards, spares, test programs, fixtures, and methods carry over with zero migration; a full 3072 Pin configuration requires 48 × 64 Pin cards. The 3072 Pin capacity is aimed at larger SoCs and multi-channel devices, completing full-pin HBM / MM / LU / TLU evaluation in a single setup. The Gen 2 board is also the hardware carrier for the next speed step: 20+ Pulse / Second is In Development. Systems are scheduled for delivery within Q1 2027.

Explore the ES660 ESD & Latch-Up Test System
The ES660 supports HBM, MM, Latch-Up, and Transient Latch-Up (TLU), scales to 3072 Pin, and covers ESD and Latch-Up evaluation of large-scale SoCs.

View ES660 product page 

About the ES660: The ES660 is ESDEMC’s automated ESD and Latch-Up test system (ESD tester), supporting HBM, MM, Latch-Up (LU), and Transient Latch-Up (TLU) with a low-parasitic relay-matrix architecture, compliant with JS-001, SP5.2, JESD78, and SP5.4.1. The P2 second-generation motherboard raises the maximum test pin count to 3072 Pin.
About ESDEMC: ESDEMC Technology LLC provides semiconductor ESD / EMC test equipment and test services.
© 2026 ESDEMC Technology LLC · This page is a product news release; final configuration and commercial terms are governed by the signed order confirmation.