Description
Air discharge ESD test and measurement has been an inconsistent task due to the difficulty of holding the ESD simulator gun and zapping the same spot, leading to inconsistencies of the ESD discharge waveforms generated by different ESD gun designs. The loosely controlled IEC and ISO standards did not specify air discharge waveform parameters. However, the air discharge waveform is a function of many parameters such as the ESD simulator physical structure, the ESD gun tip shape, the approaching speed, angle and path, the test environment temperature, humidity, and pressure. All of these factors can vary the arc length and ESD zap location of the device under test.
ES614 Series ESD Simulator Air Discharge Work Station has a digitally controlled linear guide way system developed to control the ESD simulator approaching speed and travel path for air discharge tests and calibration. This instrument can greatly improve air discharge test consistency in terms of the approaching speed and travel path. It also integrates high precision environmental sensors including temperature, relative humidity, and a pressure sensor to record the ESD test related environmental parameters.
Features:
- Numerical Controlled ESD Air Discharge Approaching Speed
- Precision Humidity, Temperature, Pressure Sensors Integrated
- LabVIEW Controlled Test and Report Software
- Spring Loaded Air Discharge Tip
- Customization for Different ESD Simulators Available
Applications:
- ESD Simulator Air Discharge Approaching Speed Control
- Automated ESD Simulator Air Discharge with Remote Control
- ESD Simulator Air Discharge Waveform Calibration
Specifications:
ES614-500 ESD Air Discharge Motion Controller | |
Maximum ESD Gun Weight | 1.5 kg ( ES613-G20 is 0.8 kg) |
Maximum Travel Length | 500 mm |
Moving Speed Control | 5 – 500 mm/s (± 5%) |
Moving Resolution | 0.037 mm step |
PC Control Port | USB |
Front Panel Control | 1 turn knob speed control, Push button moving start |
Controller Dimension | 36 X 34 X 16 cm |
Controller Weight | About 5 kg (11 lb) |
Integrated Temperature Sensor | |
Full Accuracy Range | From -0 to 65 °C |
Absolute Accuracy | ± 1 °C |
RMS noise | 0.005 °C |
Integrated Humidity Sensor | |
Response time (τ63%) | 1s |
Humidity Range | From 0 to 100 % |
Humidity Accuracy | ± 3 % relative humidity |
Humidity Hysteresis | < 2 % relative humidity |
Integrated Pressure Sensor | |
Operating range | From 300 to 1100 hPa |
RMS Noise | 0.2 Pa (equiv. to 1.7 cm) |
Sensitivity Error | ± 0.25 % (equiv. to 1 m at 400 m height change) |
Temperature Coefficient | ±11.5 Pa/K (equiv. to ±12.6 cm at 1°C temperature change) |
Ordering Information:
Line | Part # or Option # | Description |
1 | ES614-500 | ES614 ESD Air Discharge Motion Controller up to 500 mm/s |
2 | ES614-WSA | ES614 ESD Air Discharge Work Station Type A |
3 | ES614-LS | Laptop with LabVIEW RTE and Compiled ES614 Software |
4 | ES613-SAT | Spring Loaded Air Discharge Gun Tip for ES613 ESD Simulator |
5 | ES613-SCT | Spring Loaded Contact Discharge Gun Tip for ES613 ESD Simulator |
Customized ESD Gun Holder and Spring Loaded Tip are available upon request