A4003 ESD Current Target and Adapter Line (or 50 Ω conical adapter line) calibration kit is the complete all-in-one verification measurement setup to check the frequency response of ESD current target up to 4GHz, check the frequency response ESD Target Adapter Line up to 4GHz, and check the ESD Simulator calibration waveform according to the IEC/EN 61000-4-2 or ISO10605 standards.
Features:
$6,000
In stock (can be backordered)
A4003 ESD Current Target and Adapter Line (or 50 Ω conical adapter line) calibration kit is the complete all-in-one verification measurement setup to check the frequency response of ESD current target up to 4GHz, check the frequency response ESD Target Adapter Line up to 4GHz, and check the ESD Simulator calibration waveform according to the IEC/EN 61000-4-2 or ISO10605 standards.
ESD Current Target – Attenuator – Cable Chain
| Surface Finish | Gold Plated, never oxidized or rusted |
| Measurement Bandwidth | DC – 4 GHz < ± 0.5 dB up to 1GHz < ± 1.2 dB up to 4GHz |
| Input Resistance | 2.08 Ohm (± 1%) (2.00 Ohm in parallel with 50 Ohm load) |
| Max. IEC Pulse Level | Tested up to ± 30kV |
| Voltage Non-linearity | <2% up to ± 20 kV < 5% up to ± 30kV |
| Coaxial Cable Type | RG400, Double Shielded |
| Coaxial Cable Length | 0.8 m |
| Coaxial Cable Connector | SMA – N Type |
| Transfer impedance | 5A/V with default 20dB attenuator |
| Meets Standards | IEC 61000-4-2 ED. 2.0 B:2008 ISO 10605:2008 |
ESD Current Target Adapter Line
| Surface Finish | Brushed Stainless Steel |
| Measurement Bandwidth | DC – 4 GHz |
| Insertion Loss | < 0.3dB up to 4GHz |
| Reflection Coefficient | < -30dB up to 1GHz < -20dB up to 4GHz |
| Meets Standards | IEC 61000-4-2 ED. 2.0 B:2008 ISO 10605:2008 |
| A4001-N | Gold Plated Wide-band ESD Target with N Type Connector |
| AT2WN-20 | N Type Attenuator, DC-18 GHz, 2W, 20 dB |
| AT2WN-30 | N Type Attenuator, DC-18 GHz, 2W, 30 dB |
| RG4-NS-8 | RG400 Coaxial Cable, N-SMA Connectors, 0.8 meter |
| A4001-SMA2BNC | High Precision SMA-BNC Adapter |
| A4001-CAL | NIST Traceable Factory Calibration Report for A4001-Kit |
| A4002-N | Stainless Steel 50 Ohm ESD Current Target Adapter Line with N type Connector |
| A4002-CAL | NIST Traceable Factory Calibration Report for A4002 |
| A4003-SC | A4003 ESD Current Target/Adapter Line Set Storage and Protection Case |
| TN001 | ESD Target_Adapter Line Calibration Method Technical Note |
| TN002 | ESD Current Target Calibration Method Technical Note |
| TN003 | ESD Simulator Calibration Method (IEC61000-4-2 & ISO10605) Technical Note |
| Weight | 2 kg |
|---|---|
| Dimensions | 45 × 35 × 25 cm |
