Description
ES613 ESD Simulator per IEC61000-4-2 Datasheet (PDF)
The ES613 Series ESD simulator is our latest design of ESD simulator with the most advanced features, including exchangeable RC network modules, exchangeable rise time tips, zap-counter, and remote control. It meets the requirements of the IEC61000-4-2 and ISO 10605 standards.
Applications:
- System and board level ESD susceptibility test
- High voltage DC supply usage
- High voltage charging and sparking test
- High voltage breakdown test
Specifications:
System | ES613-20 | ES613-30 |
Controller Model | ES613-C20 | ES613-C30 |
ESD Gun Model | ES613-G20 | ES613-G30 |
Test voltage range | 0.1 ~ 20 kV | 0.1 ~ 30 kV |
Voltage step | 0.1 kV step | |
Voltage tolerance | Factory calibrated to ±1% (FS) | |
Voltage polarity | Positive and Negative | |
Discharge repetition | Trigger, 1Hz, 2Hz, 5Hz, 10 Hz, 20 Hz | |
Discharge counter | up to 65535 times | |
Discharge mode | Contact discharge/ Air discharge | |
Operation panel | 5 inch large touch screen | |
Trigger mode | Gun trigger / Remote Control | |
Operation modes | Manual mode Pattern mode HV supply mode Remote mode ( optional) |
|
Manual mode | IEC standard pre-settings available in 1 click | |
Pattern mode | A device under test (DUT) failure scanning mode with start, step, stop voltages, pulse per levels, polarity settings, user settings are available |
|
HV supply mode | Work as a high precision high voltage power supply, 1 mA max output current | |
Power consumption | 100 to 240 V AC 50/60 Hz +/-10% 60 W |
|
Dimensions | 35 X 28 X 15 cm | |
Weight | 8 kg | 8.5 kg |
Warranty | 2 years |
Basic Configuration:
Part Number | Description |
ES613-C20 (or ES613-C30) | 20 (or 30) kV Electrostatic and High voltage Test Controller |
ES613-G20 (or ES613-G30) | 20 (or 30) kV ESD Simulator Gun |
ES613-CT | Contact Discharge Gun Tip |
ES613-AT | Air Discharge Gun Tip |
ES613-RC1 | 150 pF / 330 Ohm RC Module |
Optional Accessories:
Part Number | Description | Specifications |
ES613-RC1 | Exchangeable RC Module 150 pF / 330 Ohm +/-10% | IEC61000-4-2 and ISO 10605 |
ES613-RC2 | Exchangeable RC Module 150 pF / 2000 Ohm +/-10% | ISO 10605 |
ES613-RC3 | Exchangeable RC Module 330 pF / 330 Ohm +/-10% | ISO 10605 |
ES613-RC4 | Exchangeable RC Module 330 pF / 2k Ohm +/-10% | ISO 10605 |
ES613-RC5 | Exchangeable RC Module 100 pF / 1500 Ohm +/-10% | JS-001-2014 HBM Model, MIL STD 883E |
ES613-RCX | Customized Exchangeable RC Module | |
ES613-FRT | Fast Rise-time Tip | Rise-time < 400 ps |
ES613-SAT | Spring Loaded Air Discharge Gun Tip | |
ES613-SCT | Spring Loaded Contact Discharge Gun Tip | |
ES614-CP | ESD Simulator Current Probe (E-field Shielded, Bandwidth 10 kHz – 200 MHz) |
|
ES614-AS500 | Air discharge speed control sliding system (Control ESD simulator approaching speed 5 – 500 mm/s) |
|
ES614-ASWS500 | Air discharge speed control work station (Control ESD simulator approaching speed 5 – 500 mm/s, approaching Angle 0 – 90 degree) |
|
A4001 | ESD Current Target Calibration Kit | Calibrate ESD simulator current waveform up to 30 kV, 4 GHz per latest IEC and ISO standard |
A4001-TP | ESD Current Target Plane | A Shielding Plane for mounting ESD Target and Shielding Oscilloscope measurements against directly coupled ESD noise |
A4001-TSC | ESD Current Target Shielding Cabinet | A Shielding Cabinet for mounting ESD Target and Shielding Oscilloscope measurements against directly coupled ESD noise |
A4002 | ESD Current Target Adapter Line | Calibrate ESD Current Target and Adapter Line up to 4 GHz per latest IEC and ISO standard |
A4003 | ESD Current Target & Adapter Line Calibration Set | Calibrate ESD simulator, ESD Current Target and Adapter Line up to 30 kV, 4 GHz per latest IEC and ISO standard |
ES615-A1 | ESD Test Table | |
ES615-A2 | Vertical Coupling Plane | |
ES615-A3 | Horizontal Coupling Plane | |
ES615-A4 | ESD Test Table Insulation Cover | |
ES615-A5 | Charge Removal Cable | |
ES615-A6 | ESD GRP – Ground Reference Plane | |