TVS-10G+ Transient Voltage Suppressor, DC – 10 GHz

The model TVS-10G+ is an ultra-high bandwidth transient voltage suppressor functional from DC – 10 GHz. This device is designed to protect oscilloscopes from high frequency, high voltage transients, such as ESD measurement. The TVS-10G+ will clamp high voltage transients and is matched to 50 Ω system. Unlike previous designs, the TVS-10G+ does not cause rising-edge distortion on signals below its trigger voltage.

Features

  • Functional for a wide bandwidth (DC – 10 GHz)
  • Clamps high frequency, high voltage transients between ±5 V and ±11 V
  • Useful for IEC 61000-4-2 contact and air discharge up to ±10 kV and ±15 kV, respectively
  • Matched to 50 Ω system
  • Insertion loss at 10 GHz approximately 0.8 dB
  • Return loss at 1 GHz less than 30 dB

$860

Available on backorder

Add to quote

Description

1.    Description

The model TVS-10G+ is an ultra-high bandwidth transient voltage suppressor functional from DC – 10 GHz. This device is designed to protect oscilloscopes from high frequency, high voltage transients, such as ESD measurement. The TVS-10G+ will clamp high voltage transients and is matched to 50 Ω system. Unlike previous designs, the TVS-10G+ does not cause rising-edge distortion on signals below its trigger voltage.

2.    Features

  • Functional for a wide bandwidth (DC – 10 GHz)
  • Clamps high frequency, high voltage transients between ±5 V and ±11 V
  • Useful for IEC 61000-4-2 contact and air discharge up to ±10 kV and ±15 kV, respectively
  • Matched to 50 Ω system
  • Insertion loss at 10 GHz approximately 0.8 dB
  • Return loss at 1 GHz less than 30 dB

3.    Applications

  • Oscilloscope protection for high frequency, high voltage measurements
  • General protection device for measurements in a 50 Ω system

4.    Specifications

Specifications Parameter Unit Comments
Clamping voltage ±7.5 – ±11 V Depends on pulse level
Maximum rated ESD level ± 10 kV IEC 61000−4−2 contact (ESD)
Maximum rated ESD level ± 15 kV IEC 61000−4−2 air (ESD)
Maximum rated surge level 4.5 A 8/20 µs
TLP dynamic resistance 0.45 4 A – 16 A
Bandwidth DC – 10 GHz
Impedance 50 From DC – 10 GHz
Weight 8 g

5.  Ordering Information

Part Number Description Lead Time
TVS-10G+ DC-10 GHz Wideband Transient Voltage Suppressor 1-3 weeks

 

Additional information

Weight 0.2 kg
Dimensions 10 × 10 × 6 cm

Documents

TVS-10G+ Transient Voltage Suppressor DATASHEET (PDF)