ES631-G2 Cable Discharge Event (CDE) Evaluation System

The ES631-G2 Cable Discharge Event (CDE) Evaluation System is a comprehensive solution designed to simulate the effects of charged cable (Ethernet, USB, HDMI, etc…) discharge to any system or device.

The system is designed with three CDE test modes (single line discharge mode, differential pair discharge mode, contact sequence discharge mode) and two Failure/Degrade Inspection Connections (Oscilloscopes or Link Partner Paths). Therefore, it allows user to be able to setup, simulate and analyze the cable discharge event in all different discharge combinations. This system also allows traffic tester to connect through the CDE test system to check the traffic functionality.

LABVIEW control software is an option provided for customers for full functions in remote control. The system is also designed with a versatile 5-inch large touchscreen interface for panel operation.

Features

  • Ethernet Cable ESD test up to 4.0 kV
  • Multiple CDE test modes available
    (Single Line Discharge, Differential Pair Discharge, Contact Sequence Discharge)
  • Dual Failure/Degrade Inspection Modes
    (Oscilloscope Link Pulse Test or Link Partner Traffic Test)
  • Embedded ESD current probes for discharged lines
  • 5 Inch Large Touch Screen Control
  • USB-Optical RS232 (virtual serial port) remote control
  • Firmware upgrade-able
  • Multiple Cable Adapters available (USB, HDMI, Ethernet, etc.…)
  • Powerful LABVIEW ATE Software (automatic test control)
SKU: ES631-LAN-1 Category: Tag:

Description

ES631-G2 Cable Discharge Event (CDE) Evaluation System DATASHEET (PDF)

1. Description

The ES631-G2 Cable Discharge Event (CDE) Evaluation System is a comprehensive solution designed to simulate the effects of charged cable (Ethernet, USB, HDMI, etc…) discharge to any system or device.

The system is designed with three CDE test modes (single line discharge mode, differential pair discharge mode, contact sequence discharge mode) and two Failure/Degrade Inspection Connections (Oscilloscopes or Link Partner Paths). Therefore, it allows user to be able to setup, simulate and analyze the cable discharge event in all different discharge combinations. This system also allows traffic tester to connect through the CDE test system to check the traffic functionality.

LABVIEW control software is an option provided for customers for full functions in remote control. The system is also designed with a versatile 5-inch large touchscreen interface for panel operation.

2. Features

  • Ethernet Cable ESD test up to 4.0 kV
  • Multiple CDE test modes available
    (Single Line Discharge, Differential Pair Discharge, Contact Sequence Discharge)
  • Dual Failure/Degrade Inspection Modes
    (Oscilloscope Link Pulse Test or Link Partner Traffic Test)
  • Embedded ESD current probes for discharged lines
  • 5 Inch Large Touch Screen Control
  • USB-Optical RS232 (virtual serial port) remote control
  • Firmware upgrade-able
  • Multiple Cable Adapters available (USB, HDMI, Ethernet, etc.…)
  • Powerful LABVIEW ATE Software (automatic test control)

3. Applications

  • General Cable Discharge Event (CDE) and analysis
  • PHY ESD protection test and analysis
  • Network switch / router ESD robustness test and analysis
  • Automatic Test Equipment (ATE) for system level Cable ESD

4. Specifications

CDE Main Controller Base Unit

ModelES631-G2.2ES631-G2.4
Maximum Charge voltage± 2 kV± 4 kV
Charge voltage Resolution10 V Step10 V Step
Charge voltage stability± 0.1% per hour (after 30 min warm up)
Number of charge lines8 lines ( 4 differential pairs )
Number of current probes8 probes for 4 differential pairs
Current Probe SpecificationSMA connectors, 1V/A, from 1.2 KHz -200 MHz, Precision ± 3%
DUT Connection PortUnshielded RJ45
DUT Connection PortShielded RJ45
Charge Cable Unit Connection PortESDEMC Designed High Voltage 9 Pin Circular Connector
Dimension35 x 28 x 15 cm  (17.5 x 13 x 5.9 inch)
WeightAbout 10 kg (22 lb)

 

Options for ES631-G2 CDE Main Controller

Option NumberDescriptions
ES631-AUSB3ES613 Charge Cable Adapter for USB
ES631-PUSB3ES613 DUT Probe for USB
ES631-ARJ45ES613 Charge Cable Adapter for RJ45
ES631-PRJ45ES613 DUT Probe for RJ45
ES631-AHDMIES613 Charge Cable Adapter for HDMI
ES631-PHDMIES613 DUT Probe for HDMI
ES631-LAN-SWLABVIEW Software for ATE test control
ES631-LAN-CALES631 CDE System Discharge Waveform Calibration Setup

 

Ethernet Charge Cable Module

ModelES631-LAN-C5EUTP200

200 meter CAT5E UTP
Charge Cable Module

ES631-LAN-C5EFTP200

200 meter CAT5E FTP
Charge Cable Module

Maximum voltage from line to GNDDC High Voltage Break Down Tested up to ± 4.5 kV
Maximum voltage Between LinesDC High Voltage Break Down Tested up to ± 4.5 kV
Cable Length200 ± 2 Meter
Ethernet Cable TypeCAT 5 Unshielded Twisted PairCAT5 Shielded Twisted Pair
Dimension35 x 28 x 15 cm
(17.5 x 13 x 5.9 inch)
35 x 28 x 15 cm
(17.5 x 13 x 5.9 inch)
WeightAbout 23 kg, ( 50 lb )About 19 kg, ( 40 lb )

5. Ordering Information

LinePart or Option Number Description
1ES631-G2.2ES631-G2.2 CDE Main Controller, 2kV Base Unit
2ES631-G2.4ES631-G2.4 CDE Main Controller, 4kV Base Unit
3ES631-AUSB3ES613 Charge Cable Adapter for USB
4ES631-PUSB3ES613 DUT Probe for USB
5ES631-ARJ45ES613 Charge Cable Adapter for RJ45
6ES631-PRJ45ES613 DUT Probe for RJ45
7ES631-AHDMIES613 Charge Cable Adapter for HDMI
8ES631-PHDMIES613 DUT Probe for HDMI
9ES631-SWLABVIEW Software for ATE test control Option for ES631-LAN CDE System
10ES631-CALDischarge Waveform Calibration Option for ES631-LAN CDE System
11ES631-LAN-C5EUTP200200 meter CAT5E UTP Charge Cable Module
12ES631-LAN-C5EFTP200200 meter CAT5E FTP Charge Cable Module

 

 

Reviews

There are no reviews yet.

Be the first to review “ES631-G2 Cable Discharge Event (CDE) Evaluation System”

Your email address will not be published. Required fields are marked *

twenty + thirteen =

This site uses Akismet to reduce spam. Learn how your comment data is processed.