ES631-LAN Ethernet Cable Discharge Event (CDE) Evaluation System

The ES631-LAN Ethernet Cable Discharge Event (CDE) Evaluation System is a comprehensive solution designed to simulate the effects of charged Ethernet cable discharge to any Ethernet based network system or device.

Features:

• Ethernet cable ESD test up to ± 2.0 or 4.0 kV
• Multiple Test Modes available (Single Line Discharge mode, Differential Pair Discharge Mode, Contact Sequence Discharge Mode, DUT Failure Check Mode)
• Embedded ESD current probes for discharged lines
• 5 Inch Large Touch Screen Control
• USB-Optical RS232 (virtual serial port) remote control
• Upgradable Firmware
• Powerful LABVIEW automatic test control

SKU: ES631-LAN Category: Tag:

Description

ES631-LAN Ethernet Cable Discharge Event (CDE) Evaluation System Datasheet

The ES631-LAN Cable Discharge Event Evaluation System is a comprehensive test system designed to simulate the effects of charged Ethernet cable discharge to any Ethernet based network system or device.

The system is designed with 4 test modes (single line discharge mode, differential pair discharge mode, contact sequence discharge mode, and all through traffic running mode). Therefore it allows the user to be able to setup, simulate and analyze the cable discharge event in all different discharge combinations. This system also allows network traffic tester to connect through the CDE test system to check the LAN traffic functionality.

LABVIEW control source codes are provided for customers for full functions in remote control. The system is also designed with a versatile 5-inch large touchscreen interface, which allows the user to be able to upgrade firmware via USB in the long term.

 

Applications:
• Ethernet Cable Discharge Event (CDE) and analysis
• PHY ESD protection test and analysis
• Network switch / router ESD robustness test and analysis
• Automatic Test Equipment (ATE) for Ethernet system ESD

 

Default Basic Setup:
• ES631-LAN Main CDE test controller
• A631-5EU-200G LAN cable charge modules
• A631-SW standalone LABVIEW Software for ATE
• Remote control source code (LABVIEW / MATLAB)
• Quick start & user manual

 

Specifications:

 

Operating Conditions:

Temperature: -10 to +50 °C

Humidity: 20 to 80% RH

Pressure: 68 to 106 kPa

 

Dimension and Weight:
• Main CDE Test Controller
2.0 kV Version: 35 x 28 x 15 cm (14 x 11 x 5.9 inch), 9 kg (20 lb)
3.0 kV Version: 35 x 28 x 15 cm (17.5 x 13 x 5.9 inch), 10 kg (22 lb)
• Charge LAN Cable Modules
A631-5EU-200G 19 inch 3U rack mount, 40 lb
A631-5ES/U-100 19 inch 2U rack mount, 30 lb

 

Support and Services:

  • Lifetime Technical Support
  • 1 Year Warranty (Extendable)
  • Recalibration Service (Fee applies)
  • Out-of-Warranty Repair (Fee applies)

Reviews

There are no reviews yet.

Be the first to review “ES631-LAN Ethernet Cable Discharge Event (CDE) Evaluation System”

Your email address will not be published. Required fields are marked *