The ES62X-SW Pulsed IV System Software provides a versatile and automatic Pulsed IV test capability with a variety of failure detection methods built in. The software utilizes adaptive gain control to automatically adjust the oscilloscope scale parameters to obtain the best measurement pulse resolution. During a Pulse IV test the DUT performance can be monitored by DC Spot Check (Leakage Current), Pulse Failure (Fuse or Snapback Behavior), Exceed DUT Voltage/Current, and Bias Failure. The software also allows for manual operation of the Pulse Generator, Source Meter Unit, and the Oscilloscope, and can measure a Static IV curve. The Analyze feature of the software allows for simultaneous viewing of four sets of data.
Date | Version | Updates |
2022-11-09 2021-11-24 |
|
Data Analysis:
Test Automation (LabVIEW Based)
|
2020-08-12 |
Data Analysis:
|
|
2020-04-29 |
Data Analysis:
|
|
2020-03-18 |
Test Automation:
Data Analysis:
|
|
2020-03-09 |
Data Analysis:
|
How to Install
Operating System
Pre-requisites
ES62X-SW (LabVIEW Based )
Supported Instruments