About Archives

Posted on September 26, 2021October 11, 2021 by Wei Huang

Careers

We’re innovative, curious and collaborative. We’re obsessed with the future of possibilities. If you are too, talk to us.

[ Check this ESDEMC Career Opportunity (pdf) for recent job opportunity ]

Please send resumes to hr@esdemc.com

Current Openings (Updated 2021 09):

1. RF Design Engineer

SUMMARY

RF Hardware Engineer is responsible for designing, prototyping, evaluating and testing high voltage and high frequency hardware, including RF analog & digital electronic circuits.

ESSENTIAL DUTIES AND RESPONSIBILITIES (include but are not limited to)

Research electronic device usability based on hardware specifications and customer requirements
Design, simulate, optimize, and prototype radio frequency (RF) circuits, inter and intro system signal integrity, improve analog & digital (A & D) electronic circuits and high voltage (HV) circuits
Make modifications and improvements on the performance of electronic devices of current products using electrical and mechanical tools
Test electronic circuits to ensure compliance with internal design goal, write test scripts and performance analysis codes per customer requirements
Maintain and operate common electronic device instruments (high speed real-time oscilloscope, high frequency digital sampling oscilloscope, wide-band signal generators, network analyzer, impedance analyzer, spectrum analyzer, time domain reflectometer, LCR meter)
Troubleshoot hardware electronic devices and process failure analysis
Provide hardware technical support for internal group and customers
Prepare and update hardware data sheets and assembly notes for the internal group

QUALIFICATIONS

Master’s degree in Electrical Engineering or in a closely related field plus minimum 6 months of experience involving ESD, HV and RF circuits
Proficiency in computer-aided (CAD) design tools: FreeCAD, LTSpice, and KiCAD
Programming skills in Python, MATLAB/Octave

2. Hardware Engineer

Responsibilities:

· Working with hardware team on designs from concept, prototype to production.

· Maintain design files and documents, tech supports for products with customers.

· Manage small batch production and inspection of new products with China office team.

· Any other necessary duties assigned by Executive Director.

Qualifications:

· BS or MS degree in Electrical or Computer engineering is preferred.

· Good knowledge and experience with general circuit & high-speed system design

· Know some programing language such as Python, C· Experience with EDA tools such as Altium Designer, Circuit Studio, KiCAD, LTSpice, etc.

· Ability to communicate effectively with other design team members.

· Ability to operate instruments, including oscilloscope, network analyzer, LCR, multi-meter, etc.

· Have good technician skill in hardware prototype, such as SMD soldering, drilling, etc.

· Good at drawing, documentation, and management for multi-tasks.

· Multiple languages (Chinese, Korea, etc.,) is a plus.

3. Application Engineer

Responsibilities:

. Work with design group from concept to product, maintain design and production documents

. Demo and promote solutions internally and externally

. Tech supports for products with existing customers

. Write patents to protect design and paper for publication

. Write datasheets, application note and manual

. Manage relationship with customers and sales representatives.

Qualifications:

· BS or MS degree in Electrical engineering or computer engineering

· Ability to operate instrument equipment is preferred, including power supplies, multi-meter, high speed oscilloscope, network analyzer, TDR, LCR meter, spectrum analyzer, etc.

· Excellent knowledge and experience with several types of programing language is preferred, such as Python, C, C++.

· Knowledge and experience with RF and microwave designs· Experience with popular design tools is preferred

· Ability to communicate effectively with other design team members.· Have good hands-on skill in prototype such as soldering, drilling, etc.

· Good at writing/drawing/documentation skills for datasheets and manual writing, and well-organized management skill for multi-tasks between projects

Posted on June 22, 2016August 8, 2021 by Peter Dolan

ESDEMC Technology LLC’s Privacy Policy

Last updated June 22, 2016

This Privacy Statement provides a clear and prominent explanation of how we collect, use, share and protect your personal data.

This Privacy Statement covers the following subjects:

1. Types of Personal Data We Collect
2. How We Collect Personal Data
3. How We Use the Personal Data We Collect
4. How We Share Your Personal Data
5. How We Store, Process and Protect Your Personal Data
6. Your Choices About Your Personal Data
7. Additional Information
8. Changes to Our Privacy Statement
9. How to Contact Us

These areas are described in detail below. This Privacy Statement does not apply to the practices of third parties that we do not own or control, including but not limited to any third-party websites, services and applications that you elect to access through our websites.
Comments or questions about our privacy practices can be sent directly to our inbox and we will respond within 1 business day.

1. Types of Personal Data We Collect

Personal data is any information relating to an identified or identifiable natural person, including information that can be used to identify you as an individual, directly or indirectly by reference to one or more factors specific to you. Personal data can include the following types of information:

Personal Information: ESDEMC Technology LLC collects and uses personal information from our customers and potential customers. Such information includes your name, contact information (postal address, telephone number, fax number, and email address), billing information, transaction history and credit card or other financial information. You may also elect to provide ESDEMC Technology LLC with information regarding your personal or professional interests, demographics, experience with our products and contact preferences.
Online Usage Iinformation: ESDEMC Technology LLC collects limited information from your online interactions with us. Our collection is limited to tracking the number of visits to our website and the hyperlinks you visited. This information is kept in a manner that does not personally identify you. The collected information does not include IP address, browser size, type and language, and referring/exit pages and URLs.

We may combine the information you provide to us through different communications and contact channels, for example by combining data collected online with information provided offline.

2. How We Collect Personal Data

ESDEMC Technology LLC collects personal information in several ways. We collect personal information that you choose to provide ESDEMC Technology LLC on esdemc.com, in person, on the phone or electronically. Additionally, we may now or in the future receive personal information about you from third parties that legally acquired the information and that have the right to share it with ESDEMC Technology LLC. For example, we may receive contact information through an email list vendor.

3. How We Use the Personal Data We Collect

Use of Personal Information: ESDEMC Technology LLC uses your personal information: (a) to respond to your correspondence; (b) to help you complete a transaction or order; (c) to provide updates on service and benefits; (d) to personalize our website for your needs; (e) to provide advertising, promotions or newsletters regarding ESDEMC Technology LLC products and services to you online or by email; (f) to obtain your feedback on ESDEMC Technology LLC products or services you have purchased; (g) to process job applications; and (h) for payment and order processing. Whenever we collect credit card numbers or other financial data, such information will be encrypted, will only be used for payment processing and will not be retained for other purposes.

Use of Online Usage Information: ESDEMC Technology LLC collects online usage information to optimize your online experience, specifically: (a) to remember information so that you will not have to re-enter it during your visit or the next time you visit the site; (b) to provide custom, personalized content and information; (c) to provide and monitor the effectiveness of our website; (d) to monitor aggregate metrics such as total number of visitors, traffic, and demographic patterns; (e) to diagnose or fix technology problems; (f) to help you efficiently access your information after you sign in; and (g) to provide advertising for ESDEMC Technology LLC products and services to you online or by email.

Use of Combined Personal Data: ESDEMC Technology LLC may sometimes combine your personal information with online usage information to build a broader profile of our individual users so that we can better serve our customers. This combined data will be used only for the purposes outlined in this Privacy Statement.

Online Advertising: We partner with trusted third parties to manage ESDEMC Technology LLC advertising on other websites. These partners use cookies to collect information about your activities on ESDEMC Technology LLC’s website, so that we can provide you advertising for ESDEMC Technology LLC products and services that are relevant to your interests. For more information on how this information is collected by the relevant third party, please review Google’s Privacy & Terms.

4. How We Share Your Personal Data

Personal Information: ESDEMC Technology LLC will not rent or sell your personal information to third parties. We will only share your personal information outside of ESDEMC Technology LLC for the reasons described below:

ESDEMC Technology LLC Business Partners: We may share your personal information with ESDEMC Technology LLC business partners including sales, rental and solution partners and agents offering ESDEMC Technology LLC products and services, and vendors acting at our direction. We do so only to the extent necessary for the specific business partnership, or as otherwise permitted by applicable law. Such ESDEMC Technology LLC business partners are required to keep this information confidential and may not use it for any purpose other than to offer, sell or rent ESDEMC Technology LLC products and services, or to provide services at ESDEMC Technology LLC’s direction.
Corporate Transactions: Circumstances may arise where ESDEMC Technology LLC decides to sell, buy, merge or otherwise reorganize businesses in some countries. Such a transaction may involve the disclosure of personal information to prospective or actual purchasers, or the receipt of such information from sellers. It is ESDEMC Technology LLC’s practice to disclose personal information in these circumstances only as permitted by applicable data protection law and to seek appropriate protection for personal information in these types of corporate transactions.
Legal Necessity: ESDEMC Technology LLC also may disclose your personal information: (a) if we are required to do so by law; (b) if we believe that it is necessary to enforce or apply our terms of use and other agreements or otherwise protect and defend the rights, property or safety of ESDEMC Technology LLC or that of our customers; or (c) to comply with a judicial proceeding, bankruptcy proceeding, court order or other legal obligation or government inquiry
Your Consent: ESDEMC Technology LLC also may disclose your personal information to any other third party with your prior consent.

Online Usage Information: We may share online usage information: (a) in any manner permitted for personal information; and (b) with vendors or service providers for the purposes described in the section above on “How We Use the Personal Data We Collect.” We may also aggregate or otherwise strip data of all personally identifying characteristics and may share that aggregated, anonymized data with third parties. Any aggregated information shared in these contexts will not contain your personal information.

Social Media Widgets: ESDEMC Technology LLC’s website may include social media features, such as the Facebook Like button, widgets such as the “Share This” button or interactive mini-programs that run on our website. These features may collect online usage information through cookies or web beacons. Social media features and widgets are either hosted by a third party or hosted directly on our website. Your interactions with these features are governed by the privacy statement of the social media company providing them.

5. How We Store, Process and Protect Your Personal Data

Storage and Processing of Your Personal Data: ESDEMC Technology LLC’s global organizational structure requires the global transfer of personal data within the ESDEMC Technology LLC group of companies. As a result, we may transfer personal data to, and store or process personal data in, countries other than the country in which the personal data originally was collected. Those countries may not have as comprehensive data protection laws as the country from which ESDEMC Technology LLC initially obtained the personal data. However, ESDEMC Technology LLC has executed agreements between and among ESDEMC Technology LLC entities operating in different countries that contain Standard Contractual Clauses (“SCCs”) as defined in the E.U. Data Protection Directive (95/46/EC), to ensure that adequate safeguards are in place for the protection of personal data. Therefore, when we transfer, store or process personal data in other countries, we will take all steps reasonably necessary to ensure that your data is treated securely and in accordance with the SCCs and this Privacy Statement.

Protecting Your Personal Data: ESDEMC Technology LLC is committed to ensuring the security and accuracy of your personal data.

Security: ESDEMC Technology LLC puts in place appropriate physical, electronic and organizational measures to safeguard and secure your data. These measures follow generally accepted industry standards both during transmission and once it is received. Unfortunately, the transmission of information over the internet is not completely secure. Although we will do our best to protect your personal data, we cannot guarantee the security of your data transmission to our website.
Accuracy: ESDEMC Technology LLC strives to keep your personal data accurate. We will provide you access to your personal data and the ability to review and correct it or ask for it to be deleted, as applicable. To request access, correction or deletion of your personal data, please refer to the available account settings on our website, or send an email to our inbox. We will respond to your request as soon as is reasonably practicable and in any event within 1 business day. In some instances, we may not be able to delete your personal data, in which case we will let you know if we are unable to do so and why. To protect your privacy and security, we will also take reasonable steps to verify your identity before granting you access or enabling you to make corrections.
Data Compromise: In the event that the security of any of your personal data under our control is compromised as a result of a breach of security, ESDEMC Technology LLC will take all reasonable steps to investigate the situation, when appropriate will notify those individuals whose personal data may have been compromised, and may take other steps in accordance with any applicable laws and regulations.

Data Retention: We will retain your information for as long as your account is active or as needed to provide you services. We will retain and use your information as necessary to comply with our legal obligations, resolve disputes, and enforce our agreements.

6. Your Choices About Your Personal Data

Opting Out of Collection of Personal Information: You may, of course, decline to submit any personal information to ESDEMC Technology LLC, but then you may not be able to take advantage of some features of our website and we may not be able to communicate with you about ESDEMC Technology LLC products and services.

Opting Out of Collection of Online Usage Information: Your browser or mobile device may allow you to delete and disable cookies. Note that disabling cookies may disable certain features available through Google’s AdWords Program.

Opting Out of ESDEMC Technology LLC Emails: You may choose to opt out of receiving marketing emails from ESDEMC Technology LLC, including newsletters and promotions by following the unsubscribe instructions included in each marketing email or by emailing us. However, please note that opting out may prevent you from receiving email messages regarding updates, improvements, or special offers. If you opt out of marketing emails, we may continue to send you transaction or service-related emails about our business dealings with you to the extent required to establish, carry out or terminate such business dealings. We reserve the right to contact you for non-promotional purposes when we believe it is necessary, including where required by law. If you have any difficulty exercising your choices or feel that choices you made on our website have not been taken into account, please call us directly.

Deletion of User Content: To request that ESDEMC Technology LLC remove personal information from our website, alter the relevant account settings or email us. In some instances, we may not be able to remove your personal information, in which case we will let you know if we are unable to do so and why. In addition, such information may continue to be available online even after it is removed from our website.

7. Additional Information

Other Websites: We are not responsible for the practices employed by websites or services linked to or from ESDEMC Technology LLC’s website including the information or content contained therein. Please remember that when you use a link to go outside ESDEMC Technology LLC’s website, our Privacy Statement does not apply to third-party websites or services. ESDEMC Technology LLC is not responsible for and does not control any third parties that you authorize to access your user content. If you are using a third-party website or service (like Facebook) and you allow such a third party access to your user content, you do so at your own risk.

Dispute Resolution: If you have questions or concerns regarding this Privacy Statement, you should first contact us by email or over the phone.

8. Changes to Our Privacy Statement

This Privacy Statement is effective as of the date stated at the start of this Privacy Statement. We reserve the right to modify this Privacy Statement at any time by posting the revised statement on our website and updating the date the statement was last revised. If we make material changes to our privacy practices, we will notify you by email or by means of a prominent notice on our home page.

9. How to Contact Us

Please contact ESDEMC Technology LLC with questions or comments about our privacy practices at:
Email: info@esdemc.com
Physical Mail Address:
ESDEMC Technology LLC
4000 Enterprise Drive, Suite 103,
Rolla, MO, 65409, USA

Phone: (+1) 573-202-6411
Toll Free (US): (+1) 877-864-8479
Fax: (+1) 877-641-9358

Posted on June 3, 2016September 9, 2021 by Shixuan Meng

ESDEMC Technology LLC’s Terms and Conditions

Payment
Shipping Policies
Cancellation
Refund/Return Policy
In-Company Service Condition
Pricing Policy
Special Order
Warranty Policy
Returns/Refunds
Complaints
Legalities

Payment

All payments are due upon receipt. If a payment is not received or payment method is declined, the buyer forfeits the ownership of any items purchased. If no payment is received, no items will be shipped.

Shipping Policies

Shipping will be paid for by the buyer in the amount agreed upon by the seller at the time of purchase. If an item is lost during shipping, the total cost of item, including shipping, will be refunded to the buyer by the seller. Shipping costs may increase significantly if shipping internationally. If an item is damaged during shipping, the buyer will not be held responsible.

If a buyer places an order greater than $1000 USD before shipping charges are calculated, then the buyer is also responsible for a shipping insurance fee of 1% of the order’s total value before adding any relevant shipping charges.

Cancellation

An item may be cancelled up until payment has been processed. Once payment has been processed, the buyer is responsible for payment.

Refund/Return Policy

A. Product Eligibility

Products may be eligible for return to ESDEMC Technology LLC under the following conditions:

- 1. When the product has been ordered by the customer in error, the following types of products are NOT eligible for return:-       Custom products (i.e, products designed, manufactured or configured to meet specific customer requirements);
    –       Repair parts that are flagged by ESDEMC Technology LLC as non-returnable; and
    
    –       Products with expired shelf life.
  2. When there is an ESDEMC Technology LLC error associated with the product, including the following:-     the Customer receives a product different from the product ordered;
    –     the Customer receives a product damaged in transit; or
    
    –     the customer receives a “DOA” (dead on arrival) product
  3. Any product that is identified as eligible for return by ESDEMC Technology LLC and has been purchased within the last 30 days.

B. Product Return Charges

1. For returns based on customer error, ESDEMC Technology LLC may at its discretion charge 15% of the net purchase price of the product as a return/restocking fee. If a return fee is charged, it may be deducted from the return credit to the customer.
2. For returns based on customer error where the customer has operated the product, ESDEMC Technology LLC may at its discretion charge an additional fee of 15% of the net purchase price of the product for the refurbishment of the product. If a refurbishment fee is charged, it may be deducted from the return credit to the customer.
For returns based on customer error, the customer will pay return freight charges to a location specified by ESDEMC Technology LLC.
For returns based on error by ESDEMC Technology LLC, ESDEMC Technology LLC will pay return freight charges and the customer will not be charged any return/restocking or refurbishment fees.

C. Release of Credit

Credit memorandums over $500 USD (or the local currency equivalent) will not be issued to the customer until the product has been physically received by ESDEMC Technology LLC. In its discretion, ESDEMC Technology LLC may provide credit memorandums under $500 USD to the customer prior to product receipt.

Credit memorandums are calculated as follows: the original invoice amount less any of the charges listed in Section (B) above. Post-invoice price changes to said product, both decreases and increases, will not affect the credit calculation.

Credit memorandums will be issued to customers within 15 working days from the date said product has been physically received by ESDEMC Technology LLC.

D. Initiating a Return

To initiate a return, you will need to retrieve your order number. It will be included on the order’s receipt, and can also be found on your online account’s Orders page. Call or email us with the order number, the product you wish to return, and why you are returning it.

If your product is eligible for return (as described in the relevant section of these Terms and Conditions), we will provide instructions on how to return the item. Once we have received the item and determined that no other fees are necessary, credit memorandums will be issued, as described in the relevant section of these Terms and Conditions.

IN-COMPANY SERVICE CONDITION:

Pricing Policy

Repair prices after 1-year warranty is $100 USD/hour plus parts. ESDEMC Technology LLC offers 1-hour free evaluation, diagnosis, and estimate. No service will be performed unless authorized by the customer.

During the time of repair, the customer can request a free demo unit if needed.

Special Order

Any special order requests for parts that we do not carry or have in stock will have to be purchased through a third party vendor. Special order parts generally take anywhere from 3-10 business days.

We are not liable for any shipping delays or defective parts that are sent to us from the vendor. We will do our best to meet the customers’ requirements but we cannot control third party vendors. There will be no discounts over the misinterpretation or misunderstanding of this policy. ESDEMC Technology LLC will not accommodate special orders if the delivery of your device or part is time sensitive.

Warranty Policy

Services provided by ESDEMC Technology LLC come with a 1-year labor and parts warranty. The warranty will be voided if there is any evidence of improper handling, improper use, physical damage, water damage, or tampering. ESDEMC Technology LLC is not responsible for any additional damages discovered that were not noted prior to service and any software related issues prior, during, and after repair. There are no refunds on repairs or accessory sales.

There will be no returns on any labor extensive repairs unless approved by a manager.

Returns/Refunds

We accept returns for damage or defective accessories within 30 days and with receipt only. We will charge a 15% restocking fee on any parts used and return for any other reason. There will be no returns on any labor extensive repairs unless approved by a manager.

Complaints

Any complaints about items or sellers may be sent to our support team: info@esdemc.com or (573) 202-6411. ESDEMC Technology LLC will respond within 24 hours during business hours

Legalities

The seller is not responsible for any health or safety concerns once the buyer has received the item. If any harm is incurred from the items purchased by the buyer, the seller shares no responsibility.

These terms and conditions are subject to change. It is the buyer’s responsibility to review this privacy policy periodically and become aware of modifications.

I have read and agree to the terms and conditions.

Posted on September 24, 2015July 15, 2022 by Wei Huang

Wei Huang

Founder

Wei Huang received his M.S.E.E. from the Missouri University of Science and Technology in 2010 and B.S.E.E. from Beijing University of Posts and Telecommunications in 2007. He was a research assistant at the MS&T EMCLAB with interests of electromagnetic, electrostatic and RF designs. He is the founder of ESDEMC Technology LLC and is focusing new ESD and EMC test solution developments.

iNARTE Certified EMC Engineer

Wei Huang has been an iNARTE Certified EMC Engineer since 2009 (The youngest iNARTE EMC Engineer, 23 years old )

Professional Preparation

Missouri University of Science and Technology (formerly UMR), USA, M.S.E.E, 2010.
Beijing University of Posts and Telecommunications, China, B.S.E.E, 2007.

Appointments

Founder, ESDEMC Technology LLC, R&D Center 2010-Present
Hardware Engineer, Portable System EE Group, Apple Inc, 2009 summer.
Research Assistant, EMC Laboratory, Missouri University of Science and Technology (formerly UMR), 2007-2010
Hardware Design Engineer, Product Design Group, Beijing HJH S&T Co. Ltd., 2005-2007

Publications

W Huang , J Dunnihoo , D Pommerenke, “Effects of TVS Integration on System Level ESD Robustness”, 2010 International EOS/ESD Symposium, Reno, NV, USA, Oct. 3 – 8

W Huang, D Liu, J Xiao, D Pommerenke J Min, G Muchaidze, “Probe Characterization and Data Process for Transient Current Reconstruction by Near Field Scanning Method”, 2010 Asia-Pacific Symposium on Electromagnetic Compatibility, Beijing, China, Apr. 12 – 16

Xiao, D. Liu, D. Pommerenke, W Huang, P. Shao, X. Li, J. Ming, G. Muchaidze, “Near Field Probe for Detecting Resonances in EMC Application”, EMC COMPO 2009, 7^th International Workshop on Electromagnetic Compatibility of Integrated Circuits, Nov. 17 – 19

W.Huang, D. Pommerenke, J. Xiao, D. Liu, J. Ming, G. Muchaidze, S. Kwon, “A Measurement Technique for ESD Current Spreading on A PCB using Near Field Scanning”, Present on 2009 IEEE International Symposium on EMC, Austin, Texas, Aug. 17 – 21

M. Giorgi, W. Huang, M. Jin, P. Shao, D. James , D. Pommerenke, “Automated Near-Field Scanning to Identify Resonances”, EMC Europe 2008, Hamburg, Germany, Sep. 8-1
W. Huang, M. Jin, P. Shao, D. James , D. Pommerenke, “Automated Near-Field Scanning to Identify Resonances”, EMC Europe 2008, Hamburg, Germany, Sep. 8-1
W. Huang, J Tichenor, D. Pommerenke, V. Pilla, P. Maheshwari, G. Maghlakelidze, “An Ethernet Cable Discharge Event (CDE) test and measurement system”, 2014 IEEE International Symposium on EMC, North Carolina, Raleigh, Aug. 3 – 8

Collaborators and Co-Editors

David Pommerenke, members of the Electromagnetic Compatibility Laboratory at the Missouri University of Science and Technology
Jerry Tichenor, Fredric Stevenson, members of the Product Development Center at the ESDEMC Technology LLC

Graduate Advisors and Postdoctoral Sponsors

Masters: Prof. Dr. – David Pommerenke.

Posted on September 22, 2015July 15, 2022 by Wei Huang

David Pommerenke

Technology Consultant, IEEE Fellow

Dr. Pommerenke has been our technical consultant from the founding of ESDEMC Technology. His in-depth knowledge of Electrostatic Discharge (ESD) and Electromagnetic Compatibility (EMC) has greatly helped our team in the research and development of many of our products.

Professional Preparation

Technical University Berlin, Germany, B.S.E.E, 1989.
Technical University Berlin, Germany, Ph.D.E.E, 1995.

Appointments

Professor, Technical University Graz, Austria, 2020-Present
Professor, Missouri University of Science and Technology, Department of Electrical & Computer Engineering, 2008-2019
Associate Professor, Missouri University of Science and Technology, Department of Electrical & Computer Engineering, 2001-2008.
EMC Research and Test Engineer at Hewlett Packard, Roseville, CA 1996-2001
Post-Doc at the Technical University Berlin, Germany 1995-1996
Research Assistant, Institute for High Voltage and Power Eng. Technical University Berlin, Germany 1990-1995

Five Most Relevant Publications

Ghasr, Mohammad Tayeb, Mohamed A. Abou-Khousa, Sergey Kharkovsky, R. Zoughi, and David Pommerenke. “Portable real-time microwave camera at 24 GHz.” Antennas and Propagation, IEEE Transactions on, 2012, 60, no. 2, pp. 1114-1125.
Fallahpour, M., M. Baumgartner, A. Kothari, M.T. Ghasr, D. Pommerenke and R. Zoughi, “Compact Ka-Band One-Port Vector Reflectometer using a Wideband Electronically-Controlled Phase-Shifter,” IEEE Transactions on Instrumentation and Measurement, October 2012, Vol. 61, no. 10, pp. 2817-2826
Bishop, J. A.; Pommerenke, D. J.; Chen, G., ‘,A Rapid-Acquisition Electrical Time-Domain Reflectometer for Dynamic Structure Analysis ‘, IEEE Trans. Instrumentation and Measurement, 2011, Vol. 60/2 pp. 655-661,
Muchaidze, G., Jayong Koo, Qing Cai, Tun Li, Lijun Han, Martwick, A., Kai Wang, Jin Min, Drewniak, J.L., Pommerenke, D., “Susceptibility Scanning as a Failure Analysis Tool for System-Level Electrostatic Discharge (ESD) Problems”, IEEE Trans. EMC, May 2008, Vol 50, No. 2, pp.268-276
Koo, J., Cai, Q.; Muchaidze, G.,Martwick, A., Wang, K.; Pommerenke, D., “Frequency-Domain Measurement Method for the Analysis of ESD Generators and Coupling”, IEEE Trans. EMC, 49/3, August 2007, pp.504-511

Other Publications

Tianqi Li; Maeshima, J.; Shumiya, H.; Pommerenke, D.J.; Yamada, T.; Araki, K, “An application of utilizing the system-efficient-ESD-design (SEED) concept to analyze an LED protection circuit of a cell phone”, Electromagnetic Compatibility (EMC), 2012 IEEE International Symposium on, August 2012, pp. 346-350
Khilkevich, V.; Pommerenke, D.; Li Gang; Xu Shuai, “An inductive probe for the measurement of common mode currents on differential traces”, Electromagnetic Compatibility (EMC), 2012 IEEE International Symposium on, 2012, pp. 720-724
Jianmin Zhang; Drewniak, J.L.; Pommerenke, D.J.; DuBroff, R.E.; Zhiping Yang; Wheling Cheng; Fisher, J.; Camerlo, S.; “Signal link-path characterization up to 20 GHz based on a stripline structure”, IEEE Int. Symp. on EMC, 2006 14-18 Aug. Vol. 2, pp.356-361
Bhargava, A.; Pommerenke, D.; Kam, K.W.; Centola, F.; Cheng Wei Lam; , “DC-DC Buck Converter EMI Reduction Using PCB Layout Modification,” Electromagnetic Compatibility, IEEE Transactions on , Vol.53, no.3, pp.806-813, Aug. 2011
Abou-Khousa, M.A.; Ghasr, M.T.; Kharkovsky, S.; Pommerenke, D.; Zoughi, R.; , “Modulated Elliptical Slot Antenna for Electric Field Mapping and Microwave Imaging,” Antennas and Propagation, IEEE Transactions on , Vol.59, no.3, March 2011, pp.733-741

Synergistic Activities

US-representative to IEC TC77b
Member IEEE EMC Society, TC-9, Computational Electromagnetics
Editorial Board, EOS/ESD Symposium on EMC (1996 – 2000)
Editorial Board European EMC-2002
Member IEEE, Electromagnetic Compatibility and Dielectrics and Electrical Insulation society

Collaborators & Other Affiliations